System~Flo B100 25 Litre
25 litre of system~Flo B100
Product Code: SYSTEM~FLO B100 25
|25 litre of system~Flo B100
System~Flo B100 is a highly effective, safe acting, low foaming organic acid cleaner and descaler.
It is formulated especially for closed recirculating systems and is an efficient remover of debris, sludge, lime scale and oxides in boilers, radiators and closed hot or cold systems.
B100 is safe for use on systems containing aluminium and can also be used as a CIP cleaner in the dairy industry.
There are other variants of the product for highly specialised applications and for further information or assistance, please call the support team at Hydro~Flo Environmental on 0845 64 34 378, who will be happy to assist you further.
|Specification / Application|
|Closed System De-scaling: In new systems use as a pre-commission cleaner between 1-5% of the system volume according to the suspected degree of fouling from flux etc.
Pre-commission cleaning will greatly aid the protective action of any scale/corrosion inhibitor such as Thermo~Flo HT. Remove filters, avoid solids entering into new plate heat exchangers by isolation and form a loop to clean the bulk of the main system before opening the system back up. Recirculate the cleaning fluid for between 1-5 hours then drain and flush thoroughly. Please contact Hydro~Flo Environmental for a more detailed clean procedure.
Soaking: Pre-Dilute 5:1 in water and soak part to be treated, (warm water will be beneficial). Allow up to 1 hour contact time. Repeat if necessary.
Dairy: Dilute 5:1 and recirculate in pipework and equipment until scale/stone removed.
IF IN DOUBT TEST ON A SMALL AREA FIRST.
Available in 1, 5, 10, 25, 205 and 1000 litre plastic containers
Write an online review and share your thoughts with other shoppers!