Dipslides /Incubators - Check and control Bacteriological Growths

Dipslides and incubators are ideal for monitoring microbial growth wherever the potential may exceed 1000 organisms per ml of sample fluid. This makes them suitable for a variety of applications in industry.General applications include :
Industrial waters, metal working fluids, chilled water systems, cooling towers, paper processing, fuel tanks, leather industry, food preparation and clinical industries. Dipslides are used to detect slime forming bacteria, moulds and yeasts and enable microbiological control to be maintained.

  • Our Dipslides typically come with a use by date of 6 - 9 months, Can be used some time after this as long as there no contamination or visible shrinkage shows on the agar surface. We however cannot accept any responsibility for failure or wrong results if this is done.
  • Dipslides should ideally be stored at around 15 degrees C; they can be stored in higher or lower temperatures if the temperature is kept from fluctuating - cool dry conditions are best but not in a refrigerator.
  • Dipslides are supplied in boxes of 10 individual with identification labels, user instructions and a comparator chart to quantify and interpret growth results.
  • Dipslides when dispatched are non-hazardous.Used & contaminated dipslides should be sterilised before disposal, or disposed of by autoclave, or incineration. Page Down to see the range of Dip Slides available to order on-line....

Products
GNAT MX2 2 Slide Dipslide Incubator
GNAT MX2 2 Slide Dipslide Incubator
Temperature Control MX Darlington switched solid state ~ Temperature Pre-set to 350C
£140.37
£150.00
Discovery MX10 -  8 Slide / Petri Dish Incubator
Discovery MX10 - 8 Slide / Petri Dish Incubator
Temperature Control MX Darlington switched solid state ~ Temperature Range Ambient + 5 to 450C +/- 0.50C
£261.40
Challenger MX25 Dipslide / Petri Dish / Reagent Incubator
Challenger MX25 Dipslide / Petri Dish / Reagent Incubator
Temperature Control MX Darlington switched solid state ~ Temperature Range Ambient + 5 to 450C +/- 0.50C
£275.36
Ranger MX45 Dipslide / Petri Dish / Reagent Incubator
Ranger MX45 Dipslide / Petri Dish / Reagent Incubator
Temperature Control MX Darlington switched solid state ~ Temperature Range Ambient + 5 to 450C +/- 0.50C
£330.68
BT2 Dipslides For General Purpose Total Count - 10 Pack
BT2 Dipslides For General Purpose Total Count - 10 Pack
Nutrient Agar + TTC*; Most Colonies show up as red spots, with total count on both sides (General Use)
£8.99
£10.50
BTM2 Dipslides For Yeast, Fungi & Bacteria - 10 Pack
BTM2 Dipslides For Yeast, Fungi & Bacteria - 10 Pack
Nutrient Agar with TTC* and Malt Extract Agar, with total count on one side and Yeasts and Moulds on the other.
£8.99
£10.50
RBS Dipslides For Selective Yeast & Moulds Total Count (With TTC Red Spot Dye) - 10 Pack
RBS Dipslides For Selective Yeast & Moulds Total Count (With TTC Red Spot Dye) - 10 Pack
Tryptone Soya Agar with TTC* and Rose Bengal Agar, with total count on one side and a yeasts and moulds on the other.
£9.95
£10.50
TP Dipslides For Total Count & Pseudomonas - 10 Pack
TP Dipslides For Total Count & Pseudomonas - 10 Pack
Nutrient Agar and Pseudomonas CFC Agar, with total count on one side and a Pseudomonas count on the other side.
£9.50
£10.50
Pay with Visa ElectronPay with VisaPay with PayPalPay with MastercardPay with Direct DebitPay with Delta